Aircol 150C OP

  • Automatic back shutter automatically opens 20 seconds after the fan is switched on and automatically closes 20 seconds after the fan is switched off.
  • Provides optimum protection against external factors such as dust, malodor or cold when the fan is not operated thanks to the automatic back shutter.
  • An indispensable part of decorative places with its elegant front view.
  • Provides the highest possible protection against external factors such as malodors and moisture, and maintains its initial appearance thanks to the high-quality ABS plastic material used.
  • Front cover can be easily cleaned by being rubbed off.
  • Minimum sound level thanks to the optimum motor and body design.
  • Self lubricating motor bearings offer a silent and long-life performance.
  • The equipment can be vertically installed on windows.
  • Class-II protection which does not require earth connection.
  • IPX4 protection against water splash.
  • All products are manufactured in accordance with the EN 60335-2-80, Low Voltage Equipment [2014/35/EU] and Electromagnetic Compatibility [2014/30/EU] norms.
  • Small and medium sized places:
  • Suitable for ventilation of bathrooms, toilets, kitchens, storerooms, laundry rooms, garages, workplaces, etc.
  • Suitable especially for direct installation to windows.



OPTIONS OF USE

  Can be directly controlled with an on-off button, or operate in parallel connection to a lamp.
  The fan can be provided to continue to operate for a certain length of time after being switched off, by use of a time delay electronic card.
  Thermal protection with sensors against overheating in hot places.
  Special production for the ambience of the place with various color options.
Voltage/Frequency(Volt/Hz)230/50
Current(A)0.14
Power(Watt)27
Air Flow(m³/hour)375
Speed(Rpm)2100
Pressure(Pa)50
Sound Pressure Level (@3m)(dB (A))39
Min. / Max. Ambient Temperature(ºC)-30 / 40
MaterialABS plastic
Protection Class / IPII / IPX4
Motor Insulation ClassH
ApprovalTSE
CertificationCE
MODELABCDEFG
AIRCOL – 150C OP213156162,3844,511,51040
Installation on Glazing
  1. Create a hole of Ø165 mm on the glass.
  2. Install the fan on the glazing by use of the fastening brackets.
  3. Replace the front cover.


Installation on Wall
  1. Create a hole of Ø165 mm on the glass.
  2. Install the fan on the wall by use of the fastening brackets.
  3. Replace the front cover.

BAĞLANTILI ÜRÜNLER

AKSA MOTOR FAN | AIRCOL © Tüm Hakları Saklıdır.